Maintaining Your Product 31
8. Insert the ink cartridge head first into the ink cartridge holder. Then press the bottom
of the ink cartridge down until it clicks into place.
9. Once you replace all the cartridges that need replacing, close the scanner to begin
priming the ink. This takes a few minutes. When you see a completion message on
the LCD screen, ink priming is finished.
Caution: Never turn off your product while ink is priming or you’ll waste ink. If you
see an ink replacement message on the LCD screen, lift the scanner unit and press
down on all the cartridges firmly. If printing on a CD or DVD, do not insert the
CD/DVD tray until ink priming is finished.
XP850QG.book Page 31 Friday, July 6, 2012 4:36 PM
To Next Page
Loading...
