6 Loading Paper
5. Slide the side edge guides against the paper, but not too tight. Make sure the paper is
under the tabs on the edge guides.
6. Keep the cassette flat as you insert it. Insert the cassette until the arrows on the right
side line up.
Loading Paper in the Rear Feed Slot
First, send your print job to the printer. Be sure to select Rear Paper Feed Slot for the
Source setting. (You can send the print job from a computer or by using the touch screen.)
Then follow the steps below to load paper in the rear paper feed slot.
1. Open the rear paper feed slot cover and pull up the paper support.
2. Slide the edge guides outward.
XP850QG.book Page 6 Friday, July 6, 2012 4:36 PM
To Next Page
Loading...
