Need help?Do you have a question about the EQUATION M400 and is the answer not in the manual?
General| Brand | EQUATION |
|---|---|
| Model | M400 |
| Category | Plumbing Product |
| Language | English |
Close the main water valve before commencing installation.
Insert the fill valve assembly into the toilet cistern.
Attach sealing rings (F, G) and use the spanner (D) to fasten the cistern.
Secure the cistern to the wall using screws and washers (I).
Set the fill valve for optimal water level in the cistern.
Connect the water supply, ensuring a minimum clearance of 20mm.
Insert the overflow pipe (J) into the cistern mechanism for smaller holes.
Use support bracket (C) for cisterns with larger diameter holes.
Clip flush rod (E) to the corresponding numbered hole on the cistern bracket.
Install button (A) and seal (B) for smaller diameter holes.
Install button (A) for larger diameter holes, omitting seal (B).
Modify the fill valve for optimal full flush water volume.
Modify the fill valve for optimal half flush water volume.
To Next Page