Why does my Equinox Systems Stage Haze 1500 say 'Machine Temperature is too HIGH'?
If the LCD display on your Equinox Systems Fog Machine flashes and shows ‘Machine Temperature is too HIGH’, it might be due to the air filter needing maintenance. Please see page 7 for further instructions. If the problem continues, contact your dealer.
What to do if Equinox Systems Stage Haze 1500 displays 'Temperature sensor error'?
If the LCD display on your Equinox Systems Fog Machine flashes and shows ‘Temperature sensor error’, the heater may be faulty or not heating up to the correct temperature. To resolve this, power the unit off and then back on. If the problem persists, please contact your dealer.
General| Type | Haze Machine |
|---|---|
| Power Consumption | 1500 W |
| Tank Capacity | 5L |
| Control | DMX, Manual |
| Warm-up Time | 5 minutes |
| Fluid Type | Water-based |
| Voltage | 220-240V |
Crucial safety instructions and warnings for proper equipment operation and user safety.
Highlights high voltage risks and necessary precautions for safe electrical handling of the equipment.
Details requirements for correct operation, including fluid usage, maintenance, and handling to prevent damage or injury.
Overview of the 1500W stage haze machine, its features, and suitability for production and events.
Details key technical data including power consumption, supply, fuse rating, dimensions, weight, and order code.
Guidance on placing the unit, safely replenishing fluid, and proper installation for optimal performance and safety.
Critical safety warnings regarding fire hazards and electrical shock during unit installation and operation.
Advice on using only recommended, quality haze fluids to prevent damage and maintain warranty.
Instructions for setting and operating the haze machine using the timer function for interval and output control.
Guide to operating the haze machine in manual mode for continuous haze output and fan speed adjustment.
Procedure for initiating and completing the unit's automatic cleaning cycle before power-off.
How to set up and use the DMX mode for flexible control of haze output and fan speed.
Explanation of the electronic fluid-level sensor and actions to take when the fluid runs out.
Solutions for common error messages like 'Machine Temperature is too HIGH' and 'Temperature sensor error'.
Recommended procedures for cleaning the unit's exterior and output nozzle using a soft cloth.
Instructions for accessing, cleaning, and refitting the air filter to maintain unit performance.
Step-by-step guide for safely replacing the fuse, including necessary precautions and fuse type.
Guide to assigning a DMX start address to the fixture for controller communication.
Explanation of the DMX 512 protocol for fixture control and data transmission.
Information on connecting multiple fixtures in a DMX chain and data cable requirements.
Important notices and diagrams for correct DMX cable connection, avoiding shorts.
Explanation of when and how to use a DMX terminator to prevent erratic behavior on long cable runs.
Details on using 5-pin XLR connectors in a 3-pin DMX line and necessary cable conversions.
Guidelines for the correct disposal of the product as Waste Electrical and Electronic Equipment.
To Next Page
