DIGITAL CLOCK
INSTRUCTION MANUAL 31003 / 31004
BATTERY INSTALLATION
The battery compartment is located on the back of the clock. Slide the battery cover away from the clock case. Remove the battery
cover and insert one battery according to the polarity indication inside the battery compartment. Replace battery cover. (Battery not
included)
TO SET THE TIME
Press down and hold the TIME SET (3) button. Depress the HOUR (5) button as many times as necessary until the correct hour is
reached. (Please note: if the Hour desired is of PM time, will display in the lower corner of the display). Next, press the MIN (4)
button until the desired TIME is reached. Release the TIME SET (3) button.
TO SET THE ALARM TIME
Press down and hold the ALARM SET (2) button. Depress the HOUR (5) button as many times as necessary until the desired hour is
reached. (Please note: if the Hour desired is of PM time, “PM” will display in the lower left comer of the display). Next, press the MIN
(4) button until the desired ALARM TIME is reached. Release the ALARM SET (2) button.
To Next Page
Need help?
General