18
WARNING! The vibration emission during actual
use of the power tool can differ from the declared
total value depending on the ways in which the
tool is used:
• How the materials are grinded, cut or drilled.
• If the tool is in good condition and well maintained.
• Use correct accessory for the tool and ensure it is
sharp and in good condition.
• The tightness of the gripping handles.
• The tool is being used as intended by its design
and these instructions.
While working with this power tool, hand/arm
vibrations occur. Adopt the correct working
practices in order to reduce the exposure
to vibration. This tool may cause hand-arm
vibration syndrome if its use is not adequately
managed.
MNL_Erbauer_18V DC Paddle Mixer_EPM18-Li_V2_220117 II.indd 18 1/17/22 12:21 PM
To Next Page
Loading...