23
The declared vibration value and sound values have been measured in accordance
with a standard test method (according to EN 62841-1 & EN 62841-2-10) and may be
used for comparing one product with another.
The declared vibration total value(s) and the declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING! The vibration and noise emissions during actual use of the
power tool can differ from the declared values depending on the ways
in which the tool is used especially what kind of workpiece is processed;
and need to identify safety measures to protect the operator that are
based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
Symbols
On the product, the rating label and within these instructions you will nd among others
the following symbols and abbreviations. Familiarise yourself with them to reduce
hazards like personal injuries and damage to property.
V Volt, (direct current voltage) mm Millimetre
kg Kilogram mAh Milliampere per hour
n
0
No-load speed °C Degree Celsius
dB(A) Decibel (A-rated) m/s² Metres per seconds squared
/min or min
-1
Per minute Lock / to tighten or secure.
Unlock / to loosen.
Read the instruction
manual.
Always wear ear protection.
Always wear eye protection. Wear a dust mask.
Wear protective gloves. Wear protective, slip-resistant
footwear.
Note / Remark. Caution / Warning.
xxWyy Manufacturing date code; year of manufacturing (20xx) and week of
manufacturing (Wyy)
MNL_Erbauer_18V DC Paddle Mixer_EPM18-Li_V2_220117 II.indd 23 1/17/22 12:21 PM
To Next Page
Loading...