Need help?Do you have a question about the Erbauer ERB371GRD and is the answer not in the manual?
Details the 2-year guarantee, its terms, and specific exclusions like wear and tear, misuse, etc.
Keep work area clean, avoid explosive atmospheres, keep bystanders away.
Match plugs, avoid grounding, keep away from water, protect cords.
Stay alert, use PPE, prevent unintentional starting, proper footing, dress appropriately.
Do not force, check switch, disconnect power, store properly, maintain tools, keep sharp, use as instructed.
Have tool serviced by qualified person, use identical replacement parts.
Read warnings, check disc/guard, avoid sanding/polishing, use recommended accessories.
Check accessory speed, size, and for damage before use.
Wear face shield, goggles, dust mask, hearing protection, gloves, apron.
Grip safely, position cord, use auxiliary handles, keep tool clean and maintained.
Sudden reaction to pinched/snagged accessory causing tool to force in opposite direction.
Maintain firm grip, position body, avoid corners, do not use saw blades.
Use recommended wheels/guards, secure guard, use wheels for intended applications.
Do not jam wheel, do not position body in line, switch off if binding, support workpieces.
Dust can cause cancer, birth defects, reproductive harm. Reduce exposure via ventilation and PPE.
Declared vibration emission values according to EN 60745 for typical weighted vibration.
Actual vibration differs based on tool use, condition, accessories, and grip.
Adopt correct working practices, use good accessories, maintain tool.
Employer health schemes, double insulation feature, and important notes on supply.
Explains symbols for reading manual, warning, double insulation, and PPE (ear, eye, dust mask).
Indicates disposal advice and manufacturing date code format.
Lists numbered parts of the angle grinder from 1 to 17.
Lists voltage, power input, rated speed, protection class, spindle thread, disc size, disc bore, and machine weight.
Provides weighted sound pressure and power levels, and threshold for ear protection.
Lists the items included with the angle grinder, e.g., guards, disc, spanner, handle.
Machine is for cutting, roughing, brushing metal/stone without water; special guard for metal cutting.
Explains how the safety switch prevents accidental starting and how to operate it.
Emphasizes holding firmly with both hands and using the auxiliary handle.
How to use spindle lock and securely fit discs with flanges.
Adjusting outer flange for disc thickness and mounting/adjusting wheel guards.
Steps to remove the guard, requiring disc and flange removal first.
How to start grinding, hand grip, guard position, grinding angle, corner work, and cooling.
Safety for cutting metal, no pressing/tilting, moderate feed, up-grinding motion.
Explains auto-stop brushes, when to replace them, and the replacement procedure.
Start at no load, don't force disc, use 15-30 degree grinding angle.
Cut in opposite rotation direction, ensure workpiece is held firmly.
Do not lubricate, clean with dry cloth, keep vents clean, unplug before servicing.
Tips for grinder not operating, wheel wobble, damaged wheels, or clogged wheels.
Guidance on proper disposal of waste electrical products and recycling.
Explains mains lead colour coding and connection to the plug terminals.
Warnings against incorrect wiring and requirements for approved plugs/fuses.
Declares compliance with EU directives and lists relevant standards.
Details of the authorised signatory and company information for the declaration.
To Next Page
General