HOW TO INSTALL THE WEATHER SHIELD
Pull the sunshade all the way forward and tuck the sunshade extension under as
far as it will go. The front edge of the sunshade should be taut with no loose fabric
drooping down.
Find the black binding on the weather shield with the Ergobaby 180 label, which is
oriented to face the front of the weather shield.
Set the stroller parking brakes. Refer to your stroller instruction manual for details.
With one hand, hold on to the black binding with the Ergobaby 180 label, and with the other hand, pull the back
portion of the weather shield behind the seat. Align the black binding with the peak of the sunshade, as shown
in the illustrations above. When aligned correctly the front spar of the weather shield will align with the front
edge of the sunshade.
PARENT-FACING FORWARD-FACING
To Next Page
Loading...
