Need help?Do you have a question about the ergoline AFFINITY 500 SUPER POWER and is the answer not in the manual?
General| Brand | ergoline |
|---|---|
| Model | AFFINITY 500 SUPER POWER |
| Category | Tanning equipment |
| Language | English |
Defines key terms like Operator, User, Personnel, Electrician, and Authorized personnel.
Explains safety notice symbols: DANGER!, WARNING!, and NOTE.
Specifies the device's purpose for cosmetic tanning and user eligibility.
Details prohibited uses and actions to avoid during operation.
Outlines responsibilities for device operation, safety, and personnel.
Mandates training for personnel on operating, safety, and maintenance procedures.
Lists the components included with the tanning device.
Provides guidance on moving, assembling, and installing the device.
Details initial setup and checks before device operation.
Emphasizes requirements for safe and fault-free device operation.
Instructions for safely disconnecting and preparing the device for disposal.
Guidelines for storing the device in a suitable environment.
Information on environmental regulations for disposing of the device and its parts.
Lists the EC directives the device complies with.
Advises against exporting the device to the USA or Canada.
Explains usage and copyright for the optional MP3 music feature.
References the location and importance of safety labels on the unit.
States that specifications are subject to change for device improvement.
Details terms and conditions for the manufacturer's warranty.
Lists conditions under which warranty claims and liability are excluded.
Lists all standard components included with the tanning device.
Details standard and optional components and their impact on operation.
Illustrates and labels the various parts and features of the tanning unit.
Lists optional accessories available for the tanning device.
Explains the core principles and components of UV tanning.
Crucial safety warnings regarding UV radiation, hearing, and user eligibility.
Specific safety guidelines for operating the tanning device and its lamps.
Guidelines for correct sensor usage and prohibited areas.
Provides advice on preparation and behavior for optimal tanning results.
Classifies skin types and their tolerance to UV exposure.
Specifies recommended tanning session durations based on skin type.
Illustrates the control panel and identifies key buttons and functions.
Details the purpose and operation of various device functions and buttons.
Specific operational details for the AFFINITY 660 DYNAMIC POWER IQ model.
Explains how the skin sensor measures UV tolerance.
Describes operation using an automatic time control system.
Explains device behavior when the sensor is not used.
Procedure for starting a tanning session.
Instructions for connecting an MP3 player to the audio system.
Critical safety measures before performing any cleaning or maintenance.
Information on error codes and troubleshooting procedures.
General guidelines for cleaning the tanning device and its components.
Instructions for cleaning acrylic glass and plastic surfaces.
Guidance on cleaning low and high pressure UV lamps and filter panels.
A schedule outlining cleaning tasks and intervals.
Importance of regular maintenance for device performance and longevity.
Care instructions for acrylic glass panels, including replacement.
Details on required maintenance intervals and using genuine spare parts.
Steps to prepare the device for cleaning and maintenance tasks.
Procedure for accessing the device interior by lifting panels.
Instructions for safely removing the upper canopy panel.
Steps to remove the side panel for access.
Procedure for opening the lower section of the tanning bed.
Critical guidance on safely replacing UV lamps to avoid injury.
Procedure for changing the chip card for lamp sets.
Detailed steps for replacing low pressure UV lamps.
Instructions for refitting makrolon tubes during lamp replacement.
Guidance on identifying and replacing faulty starters.
Instructions for handling and replacing high pressure lamps and filters.
Procedure for cleaning and recalibrating the skin sensor.
Steps for cleaning or replacing UV lamps located in the base unit.
Instructions for accessing and maintaining lamps/filters in the canopy.
Procedure for cleaning or replacing UV lamps in the side panels.
Instructions for cleaning or replacing UV lamps in the shoulder tanner.
Steps for cleaning or replacing the internal lighting of the unit.
Procedure for cleaning or replacing accent lighting in the canopy.
Instructions for cleaning or replacing accent lighting on the front panel.
Steps for cleaning or replacing the cabin's ambient lighting.
Procedure for removing, cleaning, and refitting the base filter.
Instructions for cleaning or replacing filter mats in the canopy.
Procedure for cleaning or replacing filter mats in the shoulder tanner.
Steps for emptying the condensation tank and cleaning the AC filter.
Details on maintaining the AQUA FRESH system and its canisters.
Procedure for replacing the AROMA system canister.
Instructions for safely replacing the AQUA FRESH canister.
Provides electrical specifications, power consumption, and noise levels.
Lists the physical dimensions of various tanning device models.
Details the specific UV lamps and starters for each device model.
Specifies lamp configurations for the AFFINITY 500 SUPER POWER model.
Specifies lamp configurations for the AFFINITY 500 TWIN POWER model.
Specifies lamp configurations for the AFFINITY 500 TURBO POWER model.
Specifies lamp configurations for the AFFINITY 600 TWIN POWER model.
Specifies lamp configurations for the AFFINITY 800 TWIN POWER model.
Specifies lamp configurations for the AFFINITY 660 DYNAMIC POWER model.
Specifies lamp configurations for the AFFINITY 660 DYNAMIC POWER IQ model.
Details lamp specifications for accent lighting features.
Details lamp specifications for cabin ambient lighting.
Details lamp specifications for mood lighting features.
Lists available spare parts and accessories with order numbers.
Lists compatible coin modules and time control systems.
Identifies and explains various warning and information labels on the unit.
Describes the device's main identification plate and its information.
Shows the standard EU warning sticker with safety instructions.
Highlights the restriction against exporting the device to USA/Canada.
Details the specific lamps required for different device configurations.
Indicates the requirement for regular technical maintenance.
Explains how to calculate and interpret UV lamp equivalence keys.
Defines the structure and meaning of UV lamp equivalence key notations.
To Next Page
