47
Cleaning
Please read and observe ...
Sensor and basic station
Use Antifect
®
to disinfect the sensor and basic station after each use –
see Page 93.
Filter panels and lamps
Caution!
Do not spray or immerse! Only rub with a slightly damp soft
cloth!
Caution!
Do not rub with a dry cloth – danger of scratching!
Use exclusively the specially developed fast disinfectant cleaner
Antifect
®
to clean the sensor and base station.
Other cleaning agents, especially concentrated disinfectants or
solvents (e.g. Lysoform, ethyl alcohol or other liquids containing
alcohol), may not be used for cleaning.
Lenses and rubber seals are particularly prone to damage when
not cleaned properly.
Failure to observe this voids all guarantee claims.
UV high-pressure lamps: Clean bulb with spirit if necessary.
UV low-pressure lamps: Clean with plain water (damp cloth).
Filter panels: Clean with plain water (damp cloth).
To Next Page
Loading...
