Ergotron WorkFit LX - Desk Placement Guidelines

4 of 19
888-45-323-G-00 rev.C • 12/18
1
13.3"
(338 mm)
13.3"
(338 mm)
5.9"
(150 mm)
5.9"
(150 mm)
5.9"
(150 mm)
5.9"
(150 mm)
19.2"
(488 mm)
19.2"
(488 mm)
10.75"
(273 mm)
10.75”
(273 mm)
10.3"
(262 mm)
10.3"
(262 mm)
10.3"
(262 mm)
10.3"
(262 mm)
11.7"
(297 mm)
17.6"
(447 mm)
17.6"
(447 mm)
22"
(559 mm)
23.6"
(599 mm)
3.7"
(93 mm)
3.7"
(93 mm)
18.3"
(466 mm)
18.3"
(466 mm)
11.7"
(297 mm)
1.75"
(44 mm)
11.5"
(292 mm)
Desk Placement
Maximum dimensions to
allow keyboard arm to
lower below front of desk.
CLAMP GROMMET HOLE
Grommet hole can be located anywhere along this arch.
CAUTION: Base must be completely on desk surface.
Failure to follow these instructions may result in
equipment damage or personal injury.
Top View Top View
Example of one con guration
Corner mount - Top ViewCorner mount - Top View
Front of Desk
Front of Desk
Front of Desk
Front of Desk
Side View Side View
Front of Desk
Front of Desk