1 of 7
888-06-011-G-00 rev. B • 03/20
Zip40 Cart, Replace Outlet Box
7mm
Service Manual
Tools Needed
There is one outlet box that is
inverted. make sure your new
outlet box matches the outlet
box you want to replace.
To prevent equipment damage, discharge body static before handling
the printed circuit boards or any module containing a printed
circuit board. To discharge body static, use a conductive wrist strap
attached to a good earth ground or discharge body static by touching
a grounded bare metal surface. Handle printed circuit boards or
modules by their edges once removed from protective antistatic bags.
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC
SENSITIVE DEVICES
827-181-00
This product uses semiconductors that can be damaged by electrostatic discharge (ESD).
Always handle with care to avoid damage to electrostatic-sensitive components.
ABC
1
Components
1x 10x
M4
8x
M3 x 4mm
To Next Page
Need help?
General
