ERIClean E100 - Safety; General Safety Instructions; Strong Magnets Warning

8 / 20
The main section of the top handle consists of:
Safety
Safety comes first. Therefore, please take your time to read and understand these safety
instructions. Improper use may cause harm to the user and others or void the
manufacturer’s warranty.
General Safety Instructions
Ø Sweep Before Scrub: Remove objects from the floor that can be propelled by
the rotating brushes.
Ø Check Brush Condition: Make sure to check the condition of the brushes before
use. Change the brushes only when the machine is turned off and in a park
position.
Ø Follow Proper Machine Orientation: Always keep the body of the E100 in an
upright position when cleaning fluid or batteries are inserted.
Strong Magnets
Please be aware of the integrated magnets that hold the fluid tanks in place.
1
Power switch (ON/OFF)
5
Brush on/off button
2
Water pump on/off button
6
Speed Adjustment – for low “- “
3
Battery indicator
7
Speed Adjustment – for low “+”
4
Vacuum on/off button
USER MANUAL