Ericsson AVP 1000 - Page 141

Front Panel Control
EN/LZT 790 0023/1 R16A
4-25
Build Version
Assembly Date
The time and date when the current unit was assembled. Read only
parameter.
Software Version
The version of the software currently installed on the unit. Read only
parameter.
Serial Number The serial number of the unit. Read only parameter.
Chassis Type The type of the chassis. Read only parameter.
PSU A Option The voltage level provided by PSU A. Read only parameter.
PSU B Option The voltage level provided by PSU B. Read only parameter.
Inlet A
AC, DC, none. The type of the power through inlet A of the current
unit. Read only parameter.
Inlet B
AC, DC, none. The type of the power supply through inlet B of the
current unit. Read only parameter.
Inlet Mode Supply mode of the inlets. Read only parameter.
Number of Usable Slots
The number of slots in the current unit. Single PSU units have 6 slots,
dual PSU units have 4 or 6 slots. Read only parameter.
Base Unit
Build Version
Host Controller Id The Card Id of the host controller card. Read only parameter.
Software Date The date the host software was compiled. Read only parameter.
Software Version
The version of the software running on the host controller card. Read
only parameter.
Hardware Version
The hardware version of the host controller card. Read only
parameter.
S Number
The BOM assembly number of the host card. The S number specifies
the available software and firmware features of the card. Read only
parameter.
Serial Number The serial number of the host card. Read only parameter.
Software/Firmware
BSP Software Version
The software version of the board support package. Read only
parameter.
Application Software Version
The version of the application that runs on the host controller card.
Read only parameter.
Boot FPGA Firmware Version The firmware version of the boot FPGA. Read only parameter.
Main FPGA Firmware Version The firmware version of the main FPGA. Read only parameter.
Clocks FPGA Firmware
Version
The firmware version of the clocks FPGA. Read only parameter.
Advanced
Chip Id The unique identifier of the host controller card. Read only parameter.