Web GUI Control
Figure 5.42 Support Page > Licenses Tab
5.6.4 Device Management Tab
The device management tab allows the user to reset the whole AVP or reset a CE-x
option card pair from the user interface.
Note: The ability to reset the CE-x option card pair is provided to enable the cards
to be reset without affecting other operation of the unit. This reset process
will reset and reconfigure the cards, and will take considerable time to
complete.
This page also provides a complete list of alarms available for each of the modules
in the chassis, along with the ability to change the severity of each alarm.
If the severity of multiple alarms need to be changed to the same setting, it is
possible to change them all at the same time by selecting all required alarms and
choosing the required level by clicking on Action > Set Selected to and selecting
the required severity level.
To Next Page
Loading...