Ericsson AVP 1000 - CE-X and CE-Xa (Encoder Module

Alarm Lists
EN/LZT 790 0023/1 R16A
E-37
Alarm Description Port Number Alarm ID Source Severity
Audio 16 Clipping
Audio output is clipping. Audio gain
value or input amplitude should be
reduced.
0 010C21EA Audio 16 minor
E.4.2 CE-x and CE-xA (Encoder Module)
Table E.5 Alarm List – CE-x and CE-xA (Encoder Module)
Alarm Description Port Number Alarm ID Source Severity
Over Temperature Warning
Failure to take action may cause
permanent damage to the unit.
Please check the fans are working
correctly, and that the ambient
temperature is not excessive.
0 010D0000
Encoder
Module
minor
Over Temperature
Failure to take action may cause
permanent damage to the unit.
Please switch off and refer to
Customer Support.
0 010D0001
Encoder
Module
critical
Invalid Parameter
Invalid Parameter received by the
Video/Audio Module. Please see
Video Encoder status for a more
detailed description of the error.
0 010D0002
Encoder
Module
critical
Video/Audio Module Error
Video/Audio Module Error. Please
see Video Encoder status for a more
detailed description of the error.
0 010D0003
Encoder
Module
critical
Power On Self Test Failure
At least one start-up test has failed.
Problems may be experienced with
the normal operation of the unit.
0 010D0004
Encoder
Module
critical
Internal HW Information
HW reported an unexpected status
value. This does not affect normal
operation of the unit.
0 010D0005
Encoder
Module
minor
Option Card Build Version
Mismatch
The software on this option card is
not an officially released version.
0 010D0007
Encoder
Module
minor
Video DSP Not Alive
Video DSP alive count not
incremented
1 010D0008
Encoder
Module
critical
Failed to Configure Device FPGA load failed 1 010D0009
Encoder
Module
critical
Inter–card Link Error See logs for further information 1 010D000D
Encoder
Module
critical
Lookahead Data Error See logs for further information 1 010D000E
Encoder
Module
critical
Video Buffer Error See logs for further information 1 010D000F
Encoder
Module
critical