Ericsson AVP 2000 Series - Copying Transport Streams, Services or Components; Manually Changing the Setmode State of a Transport Stream

Web GUI Control
EN/LZT 790 0023/1 R16A
5-43
2. Right click on the selected item, and choose Delete Selected from the context
menu.
Figure 5.37 Deleting a Service
Note: Ctrl key then click on the appropriate items. To select consecutive items,
select the first item, press and hold the Shift key, then select the last item.
5.5.2.5 Manually Changing the Setmode State of a Transport Stream
To change the Setmode state of a Transport Stream, do the following:
1. In the Outputs widget, select the Transport Stream for which you want to
change the Setmode state.
2. In the Properties widget, click on the Online or Offline button.
5.5.2.6 Copying Transport Streams, Services or Components
To copy a Transport Stream, do the following:
1. In the Outputs widget, select the Transport Stream, service or component you
want copy.
2. Drag the selected Transport Stream, service or component over another output
(when copying a Transport Stream), another Transport Stream (when copying a
service) or another service (when copying a component).
OR
1. In the Outputs widget, select the Transport Stream, service or component you
want copy.
2. Select Edit > Copy from the widget menu bar.
3. Select the output (when copying a Transport Stream), the Transport Stream
(when copying a service) or the service (when copying a component) you want
to copy the selected item to.