Ericsson AVP 2000 Series - Moving Transport Streams, Services or Components

Web GUI Control
5-44
EN/LZT 790 0023/1 R16A
4. Select Edit > Paste from the widget menu bar.
Note: To select more Transport Streams, services or components, press and hold
the Ctrl key then click on the appropriate items. To select consecutive
items, select the first item, press and hold the Shift key, then select the last
item.
5.5.2.7 Moving Transport Streams, Services or Components
To move a Transport Stream, do the following:
1. In the Outputs widget, select the Transport Stream, service or component you
want move.
2. While holding down the Ctrl key, drag the selected Transport Stream, service or
component over another output (when moving a Transport Stream), another
Transport Stream (when moving a service) or another service (when moving a
component).
Figure 5.38 Dragging a Transport Stream or Service
OR
1. In the Outputs widget, select the Transport Stream, service or component you
want to move.
2. Select Edit > Cut from the widget menu bar.
3. Select the output (when moving a Transport Stream), the Transport Stream
(when moving a service) or the service (when moving a component) you want to
move the selected item to.
4. Select Edit > Paste from the widget menu bar.
Note: To select more Transport Streams, services or components, press and hold
the Ctrl key then click on the appropriate items. To select consecutive
items, select the first item, press and hold the Shift key, then select the last
item.