Ericsson AVP 2000 Series - CVBS Input; HD-Optical SDI; UHD-Optical SDI

Technical Specification
B-6
EN/LZT 790 0023/1 R16A
B.3.4 HD-Optical SDI
Table B.6 HD-Optical SDI Specification
Item Specification
Safety Status SELV
Connector Designation SDI IN
Connector Type LC single-mode female sockets
Input Standard ANSI / SMPTE 297M
Input Sensitivity -23 dBm
B.3.5 UHD-Optical SDI
Table B.7 UHD-Optical SDI Specification
Item Specification
Safety Status SELV
Connector Designation SDI IN
Connector Type 2-off dual LC single-mode female sockets
Input Standard ANSI / SMPTE 297M
Input Sensitivity -23 dBm
B.3.6 CVBS Input
A common 75 Ω BNC female socket is used for CVBS input. The following table
defines the parameters for the CVBS connector.
Table B.8 CVBS Input Specification
Signal Format Specification
Supported
Standards
625-line PAL-B, -D, -G, -H, -I, -N, -Nc
525-line NTSC-M
Connector type 75 Ω BNC female socket
Input level 1 V pk-pk nominal ±5%
Return loss Better than 30 dB up to 6 MHz
Recommended cable type Belden 1694A
Input impedance 75 Ω
Connector designation CVBS