Front Panel Control
does not format the attached USB stick; it only clears its content and
recreates the directory structure required by the unit, 64 empty “slots” ready
to take configurations. This means that any data already on the USB stick
will be lost.
4.2.3.3 Loading a Configuration from USB
To load a configuration from the connected USB stick, select Manage
Configuration/Load Configuration from USB.
Note: The selected configuration is applied but not stored on the unit.
4.2.3.4 Saving a Configuration to USB
To save the current configuration of the unit to the connected USB stick, select
Manage Configuration/Save Configuration to USB.
Note: Entries already containing a stored configuration cannot be overwritten.
Choose an entry with <empty slot> label to save the configuration.
4.2.3.5 Importing Configurations from USB
To import all the configurations stored on the USB stick, select Manage
Configuration/Import Configuration/Import All Configurations.
To choose some configurations on the USB stick to import, select Manage
Configuration/Import Configuration/Select Configuration to Import. The
selected items are marked with '>', and can be imported by selecting the Import
Selected Configurations command.
Configurations can also be imported one by one by selecting Manage
Configuration/Import Configuration/USB Config <n>.
4.2.3.6 Exporting Configurations to USB
To export all of the configurations stored on the unit, select Manage
Configuration/Export Configuration/Export All Configurations.
To choose some configurations on the unit to export, select Manage
Configuration/Export Configuration/Select Configuration to Export.
The selected items are marked with '>', and can be imported by selecting Export
Selected Configurations.
Configurations can also be imported one by one by selecting Manage
Configuration/Export Configuration/Device Config <n>.
4.2.4 Rotary Knob
The rotary knob is used for scrolling in the menu system, moving the cursor or
stepping attribute values. The knob also serves as a push button and performs the
same function as the Select key.
To Next Page
Loading...