Front Panel Control
The current position on the menu is indicated by a diamond next to the text. The
diamond is solid if the parameter is configurable or outline if the text is for
information (read only).
The menu option is selected by either pressing the rotary knob or pressing the
select key.
Selecting an item will either take you to the next level in the menu tree or will provide
you with the configurable options. These are either a pre-defined list that can be
scrolled through and selected, or user entry from the alphanumeric keypad. When
changes are made, pressing the knob or the Select key will activate and save the
change. If you do not want to apply or save the change then press the Cancel key
4.2.5 Keypad
The main keys provided on the keypad are detailed in Table 4.2
Table 4.2 Keypad Description
Key Description
Select Used for selecting a menu item or accepting attribute value input.
Cancel Used for exiting a menu or cancelling attribute value input.
Ins Used for creating a link in a menu or inserting a character during text input.
Del Used for deleting an item in a list or deleting a character during parameter input.
Alphanumeric Keys
Used for entering numerical or textual values. Different characters are invoked
by multiple presses within a short interval.
4.2.6 Confidence Monitor On Key
The On key on the confidence monitor turns the monitor on or off. By pressing and
holding the On key operation related data is shown. The first line displays the total
number of hours the monitor has operated, the second line displays the software
version.
For details on how to configure the settings for the confidence monitor, see Chapter
3 Getting Started.
4.2.7 Keyboard Lock
The controls are locked after a time of inactivity. In order to set the key lock time,
navigate to Unit Config/Display Setup/Menu Display And Keypad. The keys can
be unlocked by pressing the Ins, then the Select keys in this sequence as instructed
on the front panel.
To Next Page
Loading...