Ericsson AVP 3000 Series - Bit Rate Utilization Widget; Device Information Widget

Web GUI Control
5-12
EN/LZT 790 0023/1 R16A
5.2.1.2 Bit Rate Utilization widget
The Bit Rate Utilization widget provides status information about the different
Transport Streams by color coding them according to the legend shown at the
bottom of the Transport Stream Rates accordion panel. (For the meaning of the
respective states and colors refer to Bit Rate Tracking.) Moreover, the useful and
total bit rates of each Transport Stream are also shown. Click on a Transport Stream
here and a pie chart will be displayed in the Component Bit Rates per Transport
Stream accordion panel with the bit rates of the individual services and
components.
Figure 5.9 Bit Rate Utilization Widget
5.2.1.3 Device Information Widget
The Device Information widget provides information on the unit, the option cards
and the network configuration. If there is a configuration mismatch in one of the
slots, an alarm is raised and displayed in the Alarm Monitor widget. In this case,
the Accept Hardware Configuration button is shown below the slot information. By
clicking on the button, the current configuration can be accepted. After accepting the
hardware configuration, the alarm is ceased.