Web GUI Control
Parameter Values Description
Output On Video Loss Freeze Frame, Freeze with text overlay
Repeats the last good video frame on loss of video input.
Text overlay is not supported in this release.
Black, Black with text overlay
Switches to a black test pattern on loss of video input. Text
overlay is not supported in this release.
Color Bars, Bars with text overlay
Switches to a color bars test pattern on loss of video input.
Text overlay is not supported in this release.
No PID
The video PID shall no longer be transmitted. The SI is not
updated.
Slate, Slate with text overlay
A slate file uploaded by the user will be used as the video
source.
Ident Text Overlay text to display on top of images.
MCTF Off, Default, Strong, Stronger
The amount of Motion Compensated Temporal Filtering
done to improve image quality.
Adaptive
Preprocessing
Off, On
Adaptive PreProcessing analyses the incoming video to
tries and identify areas of noise contained within the
picture. A filter is then applied to those areas of the picture
to remove the noise. Applying the filter may remove detail
from the picture and may make edges of objects appear
soft or slightly blurred.For normal operation with high
quality input video feeds it is recommended that this option
is set to OFF.
Bandwidth 30 to 100 % Sets the video horizontal bandwidth filter.
Half Line Removal Off, On
Enables or disables the removal of black half lines at the
top of the picture by substituting video data from adjacent
lines. The option is available when Video Input Format is
set to SD 576i25.
Logo
Logo insertion Off, On
Controls if logos are displayed or not. The file to use can
be selected under Logo file.
Logo file
The file to use as a logo. The selected file can be
uploaded by selecting the Upload option. Not supported in
this release.
A fixed logo position? On, Off
Controls whether to use the default position for overlaying
the logo on the video. Not supported in this release.
The X position of the
logo
The position relative to left of the screen 0 (number of
pixels per video line - logo width - 1). If an invalid position
is specified, a logo display alarm will be generated.
Displayed only if A fixed logo position? is set to Off. Not
supported in this release.
The Y position of the
logo
The position relative to top of screen 0 (number of video
lines - logo height - 1). If an invalid position is specified, a
logo display alarm will be generated. Displayed only if A
fixed logo position? is set to Off. Not supported in this
release.
HD to SD Video Down-conversion
Default Aspect Ratio
Conversion
Anamorphic, Center Cut, Letterbox
The down-conversion to apply when AFD is lost or AFD
code 000 is received.
Use Input AFD true, false
Specifies whether to attempt to use AFD code at input for
format conversion or always apply the default.
To Next Page
Loading...