Options, Licensing and Upgrades
7.4.2.2 Inputs
This module provides the following inputs:
• SD/HD-SDI Input via a 75 Ω BNC female connector.
• Audio Input via a 15-way D-Type male connector for audio and (see Chapter 2
Installing the Equipment).
7.4.2.3 Video
• SD/HD-SDI video input.
• SD & HD JPEG 2000, 4:2:2 10 bit video encoding.
• Vertical resolution: 720 or 1080 (HD), 567 or 480 (SD).
• Horizontal Resolution: 1920 or 1280 (HD), 720 (SD).
• Ultra Low Latency.
• Bit rate tracking.
7.4.2.4 Input Detection
The CE-a J2K VCM is capable of detecting if there is a valid video stream available
at the SDI input. See Chapter 5, Web GUI Control for configuration details.
7.4.2.5 Ancillary Data
The CE-a J2K VCM is capable of extracting up to 2 Mbps of the following ANC data
from the SDI output in HD mode:
• Generic ANC in accordance with SMPTE 2038-2008.
7.4.2.6 VBI
In SD mode, the CE-a J2K VCM is capable of encoding the VBI lines as part of the
picture.
7.4.2.7 Audio Compression
• Four channels AES/EBU digital audio input either de-embedded from SD/HD-
SDI or via the Audio/Data input connector.
• Supported audio coding modes:
- Pass-thru of pre-encoded Dolby E
- Pass-thru of uncompressed audio (Linear PCM – SMPTE 302M).
7.4.2.8 Indications
An LED is provided to indicate SDI lock Status.
To Next Page
Loading...