Ericsson AVP 3000 Series - E.2 Alarms List - CE-a, CE-x Pre-Processor, CE-HEVC VCMs

Alarm Lists
E-8
EN/LZT 790 0023/1 R16A
Alarm Description Port Number Alarm ID Source Severity
MGP Failure
Failed to go online, previous online
device preventing transmission
0 00000491 Base Unit major
MGP Collision
Potential duplicate transmission
detected
0 00000492 Base Unit major
MGP Spurious Spurious MSM packet detected 0 00000493 Base Unit minor
CSM Contact lost
No CSMs received from Control
System
0 00000680 Base Unit minor
Datagram loss is greater than 0
The datagram loss rate for the
Transport Stream is greater than 0.
1
000006B0 –
0000073F
Base Unit major
Sequence number errors in
Transport Stream
There are sequence number errors
in the Transport Stream.
1
000007B0 –
0000083E
Base Unit major
No data available for Input
Transport Stream
Both Primary and Backup Input
Transport Streams have failed.
1
00000500 –
0000057F
Base Unit critical
Input Transport Stream running
on Backup
Primary Input Transport Stream has
failed.
1
00000580 –
000005FF
Base Unit warning
Input Transport Stream missing Input Transport Stream has failed. 1
00000601 –
0000067F
Base Unit major
E.2 Alarms List – CE-a, CE-x Pre-Processor, CE-HEVC
VCMs
The following table lists the alarm and failure identifiers generated by the Encoding
VCM.
Note: The first two bits of the AlarmID specify the slot number that the card raising
the alarm is fitted in (01 to 06)
Table E.2 Alarm List – CE-a, CE-x Pre-Processor, CE-HEVC VCMs
Alarm Description Port Number Alarm ID Source Severity
Over Temperature Warning Failure to take action may cause
permanent damage to the unit.
Please check the fans are working
correctly, and that the ambient
temperature is not excessive.
0 010C0000 VCM
Module
minor
Over Temperature Failure to take action may cause
permanent damage to the unit.
Please switch off and refer to
Customer Support.
0 010C0001 VCM
Module
critical
Invalid Parameter Invalid Parameter received by the
Video/Audio Module. Please see
Video Encoder status for a more
detailed description of the error.
0 010C0002 VCM
Module
critical
Video/Audio Module Error Video/Audio Module Error. Please
see Video Encoder status for a more
detailed description of the error.
0 010C0003 VCM
Module
critical