Ericsson AVP 3000 Series - E.3 Alarms List - CE-a J2 K VCM

Alarm Lists
EN/LZT 790 0023/1 R16A
E-21
Alarm Description Port Number Alarm ID Source Severity
Audio 16 TS input error Incoming transport stream error.
Please check source TS.
0 010C21E1 Audio 16 major
Audio 16 Compressed audio not
detected
Compressed audio not detected on
input. Please check source
connection and source format.
0 010C21E2 Audio 16 minor
Audio 16 Input frame CRC
failure
CRC error in compressed input
frame. Output is muted.
0 010C21E3 Audio 16 minor
Audio 16 Unsupported sample
rate
Unsupported sample rate at decoder
output.
0 010C21E4 Audio 16 minor
Audio 16 Dolby E program not
present
Program not present in Dolby E
stream.
0 010C21E5 Audio 16 minor
Audio 16 Dolby E alignment Dolby E frames not properly aligned
to video frames. May glitch on frame
drop/repeat and video may not be
aligned to audio.
0 010C21E6 Audio 16 minor
Audio 16 Dolby E metadata
frame rate mismatch
Frame rate indicated in Dolby E
metadata does not match current
video frame rate.
0 010C21E7 Audio 16 minor
Audio 16 ADS control track Control track for audio description
not present.
0 010C21E8 Audio 16 minor
Audio 16 ADS silence Silent period detected. Valid only for
Audio Description Service encoding.
0 010C21E9 Audio 16 minor
Audio 16 Clipping Audio output is clipping. Audio gain
value or input amplitude should be
reduced.
0 010C21EA Audio 16 minor
E.3 Alarms List – CE-a J2K VCM
The following table lists the alarm and failure identifiers generated by the CE-a J2K
VCM.
Table E.3 Alarm List – CE-a J2K VCM
Alarm Description Port Number Alarm ID Source Severity
Over Temperature Warning
Failure to take action may cause
permanent damage to the unit.
Please check the fans are working
correctly, and that the ambient
temperature is not excessive.
0 010C0000
CE-a J2K
Module
minor
Over Temperature
Failure to take action may cause
permanent damage to the unit.
Please switch off and refer to
Customer Support.
0 010C0001
CE-a J2K
Module
critical
Invalid Parameter
Invalid Parameter received by the
Video/Audio Module. Please see
Video Encoder status for a more
detailed description of the error.
0 010C0002
CE-a J2K
Module
critical