EasyManua.ls Logo

Ericsson AVP 4000 - Page 159

Ericsson AVP 4000
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front Panel Control
1/1553-FGC 101 1790 Uen Y
4-19
Link Status
Link Down, Link Up. The status of the current physical data interface. Read only
parameter.
Link Up Time
The time in days, hours, minutes and seconds the link is established. Read only
parameter.
TX Packets Packets transmitted since the link is up. Read only parameter.
RX Packets Packets received since the link is up. Read only parameter.
IP Address The IP address of the physical data interface.
Model
Build Version
Assembly Date The time and date when the current unit was assembled. Read only parameter.
Software Version The version of the software currently installed on the unit. Read only parameter.
Serial Number The serial number of the unit. Read only parameter.
Chassis Type The type of the chassis. Read only parameter.
PSU A Option The voltage level provided by PSU A. Read only parameter.
PSU B Option The voltage level provided by PSU B. Read only parameter.
Inlet A
AC, DC, none. The type of the power through inlet A of the current unit. Read only
parameter.
Inlet B
AC, DC, none. The type of the power supply through inlet B of the current unit. Read
only parameter.
Inlet Mode Supply mode of the inlets. Read only parameter.
Number of Usable Slots
The number of slots in the current unit. Single PSU units have 6 slots, dual PSU units
have 4 or 6 slots. Read only parameter.
Base Unit
Build Version
Host Controller Card Id The Card Id of the host controller card. Read only parameter.
Software Date The date the host software was compiled. Read only parameter.
Software Version The version of the software running on the host controller card. Read only parameter.
Hardware Version The hardware version of the host controller card. Read only parameter.
Backplane Version The backplane version of the host controller card. Read only parameter.
S Number
The BOM assembly number of the host card. The S number specifies the available
software and firmware features of the card. Read only parameter.
Serial Number The serial number of the host card. Read only parameter.
Software/Firmware
BSP Software Version The software version of the board support package. Read only parameter.
Application Software
Version
The version of the application that runs on the host controller card. Read only
parameter.
Boot FPGA Firmware
The firmware version of the boot FPGA. Read only parameter.

Table of Contents

Related product manuals