Ericsson AVP 4000 - Ancillary Data; Audio Compression; Input Detection; Video

Options, Licensing and Upgrades
1/1553-FGC 101 1790 Uen Y
7-11
• 3G/HD-SDI Input via an LC optical female connector.
• UHD using 4 off 3G-SDI Inputs via LC female connectors.
Note: SFP Modules are NOT hot-swappable.
7.8.3 Video
• SDI video input.
• Frame re-synchronization.
• HD & UHD HEVC, 4:2:0 & 4:2:2 Video Encoding (depending on purchased
licenses).
• Vertical resolution: 720 or 1080 (HD), 2160 (UHD).
• Horizontal Resolution: 1920 or 1280 (HD), 3840 (UHD).
• Low Delay/Mega Low Delay.
• Bit rate tracking.
7.8.4 Input Detection
The CE-HEVC VCM is capable of detecting if there is a valid video stream available
at the SDI input. See Chapter 3, Getting Started: How to Configure and use Video
Input detection for details.
7.8.5 Ancillary Data
• Closed Captions: EIA-608, EIA-708 via SMPTE 334.
• Time Code.
• SMPTE 2016-3 AFD and Bar Data
• HDR/WSS signalling. SDR (BT.709), UHD SDR (BT.2020), HDR HLG10 (HDR
in VUI), HDR HLG10 (SDR in VUI), HDR PQ10.
7.8.6 Audio Compression
• Up to eight channels AES/EBU digital audio input either de-embedded from
SD/HD-SDI or via the Audio/Data input connector.
• Supported audio coding modes:
- MPEG-1 Layer II (32 kbps to 384 kbps) (additional pairs available with
CE/SWO/M1L2 software option).
- MPEG-1 Layer II Phase Aligned Audio (384 kbps) (software option
CE/SWO/PAA).