Ericsson AXX 9100 CONNECT - Configure Community-Handler

AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
36
2.1.2 Configure Community-handler
The following example shows how to set community for a default
user. If setting community for a specific user, the corresponding IP
address must be entered instead of 0.0.0.0
1. AXXCLI>com
2. Press Enter.
3. AXXCLI>Community-handler\ ?
4. Press Enter.
*** current menu path:
<root>
Community-Handler
*** valid commands:
Add: Add Community entry
Edit: Edit Community entry
Remove: Remove Community entry
Show: Show Community entry
Running-Config:
Exit:
AXXCLI>Community-handler\
5. AXXCLI>Community-handler\add man=0.0.0.0 com=public
acc=super traps=disable
6. Press Enter.
MANAGER: 0.0.0.0
COMMUNITY: public
ACCESS: super
TRAPS: disable
AXXCLI>Community-handler\