AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
4
1.3.2 Unpack the AXX 9100 CONNECT Service
modules
Caution!
When opening a module container, use caution to avoid
damaging the contents.
Caution!
Wear a grounding wrist strap while unpacking,handling and
interconnecting the AXX 9100 CONNECT equipment modules, to
discharge any static buildup.
1. Open the container and remove the module(s) and packing
material.
2. Carefully remove anti-static bag from the module(s).
1.4 Installation
This section provides instructions before installing AXX 9100
CONNECT unit.
NOTE! The instructions in this section primarily address the
installation of the AXX 9100 CONNECT, and modules
supplied by Ericsson AXXESSIT AS. Codes and regulations
for installing racks, electrical wiring, raceways, and other
equipment is not covered in this manual,
Caution!
Wear a grounding wrist strap while unpacking,handling and
interconnecting the AXX 9100 CONNECT equipment modules, to
discharge any static buildup.
To Next Page
Loading...