SAFETY PRECAUTIONS
3 (4)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/LT Magnus Lindahl ECS/S/LT-96:5031
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KI/ECS/S/LTC (Ulf Brömster) 1996-06-03 A
965031.doc
Disposal
Defective and broken components MUST NOT be disposed of in containers used for
general refuse.
Defective components should be individually wrapped, clearly identified as
“DEFECTIVE BERYLLIA COMPONENTS” and returned for subsequent disposal. Such
components securely packed and with inside identification, may also be returned
directly to the manufacturer.
Broken components should be individually wrapped and identified as “BROKEN
BERYLLIA COMPONENTS”. They MUST NOT be sent through the post and should
be returned to a depot by hand.
Medical precautions
If Beryllia is believed to be on, or have entered the skin through cuts or abrasions, the
area should be thoroughly washed and treated by normal first aid methods followed by
subsequent medical inspection.
Suspected inhalation should be treated as soon as possible by a doctor, preferably at
a hospital.
To Next Page
Loading...
