Ericsson Base Station F800 - Page 36

Open
DESCRIPTION
1 (1)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other)
Nr - No.
KL/ECS/S/MK Rune Tapper
ECSTAP 97:1055
Dokansv/Godk - Doc respons/Approved
Kontr - Checked
Datum - Date
Rev
File
KL/ECS/S/MK (Rune Tapper)
1997-10-30
A
Operating Instructions F800
The F800 base station is normally not operated locally other than for
maintenance and service by a radio technician.
The back plane of F800 is equipped with tree LED (Light Emitting Diodes) to
indicate the following states:
Sign on back plane
Color
Comment
+12V
Green
Lights when 12VDC is connected
TX
Red
Lights when the transmitter is on
SQ
Yellow
Lights when the carrier is received
See fig 1.
There is also a 16 positions channel switch that can be operated by a small
screw driver. The 16 positions are marked: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C,
D, E, F. The channel number is selected by setting the switch to any position
between 1 and F. In systems where the line panel is controlling the channel
setting, the channel switch should be set to position 0.
Fig 1, F800 seen from the front with the front cover removed
LIJ
+12V
TX
SQ
LIJ
MRS3000 Line Panel
MRS5000 Line Panel
Power LED
(Green)
TX LED
(Red)
Squelch LED
(Yellow)
Channel Selector
(Rotary switch)
F800
Transceiver
unit
Connection for
service tool F800
LPC 102 81 or
LPC 102 213
97-1055-Operating Instructions F800.doc
EN/FAD 109 116 R4