89BusinessPhone – Dialog 4222 Office / Dialog 3211 & 3212
Settings
Handset and loudspeaker volume
Use the volume keys. You can set different volume levels for
internal and external calls and for Background Music. During a call,
adjust handset listening volume in handset mode. Adjust
loudspeaker volume in Monitor mode or during Background Music.
ì Press to change the volume.
Ringing signal
By programming, you can adjust ringing type (2 types), ringing
volume (10 steps) and ringing character (10 characters).
*00* Enter Programming mode.
You can now select ringing type, volume or character.
Ringing type
Select type 1 if you want to set the ringing volume at a constant
level, select type 2 if you want gradually increasing volume when
the phone rings.
1*1 Press.
Or:
1*2 Press.
You will hear the selected type.
í Press to finish the procedure.
Note: When type 2 is selected, the programming of the
ringing volume is not applicable.
Dialog4222En.book Page 89 Tuesday, February 4, 2003 12:45 AM
To Next Page
Loading...
