Ericsson DIALOG 4222 OFFICE - Page 10

Description
BusinessPhone – Dialog 4222 Office / Dialog 3211 & 321210
1 Display (Standard telephone only)
2x20 characters. See section “Display info” on page 14.
22nd
Key for access to secondary key functions (These functions are
stated on the second line of the corresponding key).
3Message / Info
a. To send and receive messages. See section “Messages” on
page 51.
b. To enter information. See section “Absence Information” on
page 47.
4 Dual-Function programmable keys (A-D)
Storing numbers, program functions. See section “Settings” on
page 84.
5 Dual-Function programmable key (C) / Headset key
a. Storing numbers and program functions.
b. The Headset function is only available with option unit
(DBY 410 02) installed. The Headset key is programmed by the
system administrator. See section “Accessories” on page 93.
6 Transfer / Diversion
a. Transfer an ongoing call. See section “During Calls” on page 33.
b. Activate/Deactivate diversion. See section “Call Forwarding” on
page 41.
7 Inquiry / Conference
a. To make an inquiry to an internal or external party.
b. To establish a telephone conference.
See section “During Calls” on page 33.
8 Line 2 / Read & (Standard telephone only)
a. Line key 2 for in and outgoing calls.
b. Read information (Standard telephone only). See section
“Absence Information” on page 47.
9 Line 1 / Save/Redial
a. Line key 1 for in and outgoing calls.
b. Save or redial an external number. See section “Outgoing Calls”
on page 22.
10 Volume control
To adjust the volume. See section “Settings” on page 84.
11 Mute
To switch the microphone on or off. See section “During Calls” on
page 33.
Dialog4222En.book Page 10 Tuesday, February 4, 2003 12:45 AM