Ericsson DIALOG 4222 OFFICE - Program a function

85BusinessPhone – Dialog 4222 Office / Dialog 3211 & 3212
Settings
Program a function
How to program a function on key A.
Note: Some functions can also be programmed as
Individual Abbreviated Numbers, see section “Abbreviated
Numbers” on page 27.
*00* Enter Programming mode.
_AÔ Press the desired programmable key.
z Select Function code.
See section “Function codes and required data” on page 87.
_AÕÔ Press the programmable key again.
z Enter associated number.
See section “Function codes and required data” on page 87.
_AÕÔ Press the programmable key again.
Continue with section Select ringing character.
or
í Press to finish programming.
After approximately 10 seconds, the Function key is active
Select ringing character
z Select ringing character (0-4).
See section “Function codes and required data” on page 87.
_AÕÔ Press the programmable key again.
í Press to finish programming.
After approximately 10 seconds, the Function key is active.
Example:
Program Supervision of extension 204 on key A, with ringing
character 1. For available Function codes, see section “Function
codes and required data” on page 87.
Dialog4222En.book Page 85 Tuesday, February 4, 2003 12:45 AM