Ericsson Dialog 4225 Vision - Call Forwarding

61Dialog 4223 Professional/Dialog 4225 Vision
Call Forwarding
Order Direct Diversion from your own extension
The call is diverted to an individual position or up to three pre-
determined common answering positions (depending on the type
of the incoming call). Programmed by your system administrator.
Note: Diversion can also be ordered and cancelled from
the answering position, use the same procedure as in
section “Internal Follow-me” on page 64.
Diversion Ô Press,
Note: Function key preprogrammed by your system
administrator. If you order Diversion with the handset off
hook or the loudspeaker on, press the Diversion key twice.
or
Absence press (see display).
If
Absence is not shown, press more... until appearing.
Down or Up Press to frame Direct Diversion to nnnn (see display).
(nnnn = number to the answering position, e.g. the operator).
Activate Press (see display).
Exit Press (see display).
Note: You can also use the following procedure to activate:
dial
* 2 # and press the Clear key.
Cancel Direct Diversion from your own extension
Diversion ÕÔ Press,
Note: Function key preprogrammed by your system
administrator.
or
NoDiversion press (see display).
Note: You can also use the following procedure to cancel:
dial
# 2 # and press the Clear key.