Ericsson Dialog 4422 IP Office - Starting the Phone: Log On;Off

15BusinessPhone – Ericsson Dialog 4422 IP Office
Start the Phone – Log On/Off
Start the Phone – Log On/Off
All system settings for your IP phone must be set by the system
administrator before you can use the phone.
When this is done, and the phone is connected to the local network
(LAN), your phone starts the start-up procedure automatically when
connected to the mains.
Notes:
The phone does not work during a power failure. After a
power failure the phone will restart automatically. However,
when a password is requested, you must log on before the
phone can be used again.
If your phone does not work properly, press and hold the C-
key, the Mute key and
# simultaneously for at least one
second to reset the phone.