53BusinessPhone – Ericsson Dialog 4422 IP Office
Group Features
If two or more extensions simultaneously attempt to answer a call
from the Common Bell extension, only the first extension will pick it
up. The other extensions will receive the number unobtainable
tone. This will also happen if you dial the Common Bell pick-up
code and there are no calls waiting at the Common Bell extension.
Note: You can also place the Common Bell pick-up code
on a programmable key.
Group Hunting
Your telephone can be included in one or several hunt groups. In a
hunt group all members are represented with one common
directory number. 16 hunt groups can be programmed, each
containing 1 to 20 members. A member can be either an extension
number, an operator console or a fictive number. Please ask your
system administrator if you require this function.
Incoming calls to the hunt group are directed to free extensions in
the group. The hunt order within the group can be changed to suit
your needs. If all members of the hunt group are busy, an incoming
call is being queued. If no one answers this call before the
programmed time, the call is forwarded to the programmed
answering position (e.g. operator).
Note: If all members in a hunt group are busy, the Callback
or Intrusion function is not available.
Log in
Before you can answer group hunting calls, you must log in.
To log in to one specific hunt group:
*28* Dial.
z Dial the hunt group number.
Please ask your system administrator for the configured number.
# Press.
Verification tone.
í Press to finish the procedure.
To Next Page
Loading...
