Ericsson Dialog 4422 IP Office - Page 62

Settings
BusinessPhone – Ericsson Dialog 4422 IP Office62
 Press to select the Programmable Keys menu.
Ô Press a programmable key.
Note: The Settings, Call List and Line key are pre-defined
and cannot be used as programmable keys.
The display shows the current programming
í Press to keep the current number programming.
Or:
z Enter a new number.
Internal directory number, function code or line access code +
public number.
 Press to store the entered number.
Wait until the following display will be shown again.
í Press to return to the main Settings menu.
Settings
ÕÔ Press to exit the Settings mode.
Note: You can remove the transparent cover for writing the
names beside the keys, see section “Install Card” on
page 90.
Programmable Keys
Press the key to program
Current number: 6134
Enter new number:
Programmable Keys
Press the key to program