Glossary
Default Setting
None.
Command Usage
The CLI saves the last 100 commands. This command can be used to list all
these commands. The number in front of the command is the same as the
number that was in the prompt. The command help usage history will
display information about how to use the history list.
Example
efn# history
13.7.4 passwd
Use this command to change the password for the current user of the
EFN324.
Syntax
passwd <password>
Arguments:
<password> - The password.
Default Setting
adminExample
efn# passwd topsecret2
13.7.5 ping
Use this command to test the IP connection to another device.
Syntax
ping <host>
Arguments:
To Next Page
Loading...