IndexIndex
Example:
efn# add spanning_tree 1 ports ethernet_port 1-2,5
path_cost 2 priority 1 enabled no
13.8.6 connect vlan
Use this command to connect a port to a switching domain, and to specify
QoS parameters.
Syntax
connect vlan <vlan> ethernet_port <port> egress
[bandwidth_limitation {<type>|none}]
[broadcast_allowed {no|yes}]
[description <string>]
[p_tag {<tag>|transparent}]
[first_ethertype {q_vlan|s_vlan|s_vlan_9200|
transparent|vman_vlan}]
[flow_selector <flow_selection_criteria> flows <flows>
[default_flow <default_flow>]]
[second_p_tag {<tag>|transparent}]
[second_ethertype {q_vlan|s_vlan|s_vlan_9200|
vman_vlan| transparent}]
[second_tag {<VLAN-ID>|transparent|untagged}]
[tag {<VLAN-ID>|transparent|untagged}]
connect vlan <vlan> ethernet_port <port> ingress
[bandwidth_limitation {<type>|none}]
[description <string>]
[filter_profile <profile>]
[flow_selector <flow_selection_criteria> flows <flows>
[default_flow <default_flow>]]
[ip_destinations {single <ip-address>|range <ip-
address>-<ip-address>}]
[second_tags{<VLAN-ID> |untagged}]
[tags {<list-of-VLAN-IDs>|untagged|*}]
connect vlan <vlan> host_port
Arguments:
vlan <vlan> – Set the number of the Switching Domain. Range 1 to
200.
ethernet_port <port> - Set the number of the Ethernet port. Range
1 to 26.
To Next Page
Loading...