Glossary
Syntax
set global_filter <global-filter> da {integer|mac-address|
all|broadcast|local|multicast}
set global_filter <global-filter> da_mask {integer|mac-
address}
set global_filter <global-filter> enabled {no|yes}
set global_filter <global-filter> sa {integer|mac-address|
all|local}
set global_filter <global-filter> sa_mask {integer|mac-
address}
set global_filter <global-filter> type {<type>|all|arp}
set global_filter <global-filter> type_mask <type>
Arguments:
<global-filter> – Global filter number. Range 1 to 8.
da integer/mac-address/all/broadcast/local/
multicast/da_mask – Destination address. integer: decimal
figure. all: corresponding mask is set to all zeros. broadcast: both da
and da_mask are set to all ones. local: second bit in da and da_mask
are set to ones, all others to zeros. multicast: first bit in da and
da_mask are set to ones, all others to zeros.
da_mask integer/mac-address – Address mask of the destination.
enabled no/yes – Enabled or disabled by the operator.
sa integer/mac-address/all/local – Source address.
integer: decimal number. all: corresponding mask is set to all zeros.
local: second bit in da and da_mask is set to ones, all others to zeros.
sa_mask integer/mac-address – Address mask of the source.
type <type>/all/arp – Type. Range: 0 to 65535 (arp = hex 0806 =
dec 2054, all = dec 65535). all: corresponding mask is set to all zeros.
arp: type is set to 08:06 (INTEGER 2054), type_mask to ff:ff.
type_mask <type> - Type mask.
To Next Page
Loading...