IndexIndex
ethernet_port 2
ethernet_port 3
…
ethernet_port 25
ethernet_port 26
4.6 Attribute
Each resource object contains data in the form of attributes. There are three
types of attributes:
Configuration attributes. These are also called parameters or
configuration parameters. Their values are determined and set by an
operator.
Status attributes. Their values are determined and set by the system itself.
Info attributes. Info parameters are set at the factory, during production,
and are not supposed to be changed during the system lifetime.
The values of all types of parameters may be read using ‘get’ commands.
Figure 5 on page 12 shows examples of different attributes of the main_board
resource object.
Figure 5 Example of Different Attribute Types of a Resource Object
4.7 Command
Interact with the system by directing commands to its resource objects.
main_board
Information:
# serial no = 1234
Status:
# temperature = 56
Configuration:
# temperature_limit = 80
To Next Page
Loading...