IndexIndex
description Optional text.
filter_profile Specifies filter conditions.
flow_selector Assigns specific p-bit or DSCP values to specific
flows.
ip_destination Specifies which IP addresses the End-users can
use as IP destination address.
tags, second_tags Specification of allowed VLAN IDs for incoming
packets. The option ‘untagged’ is also available.
egress followed by a sub-set of the following:
Attribute Description
bandwidth_limitation Specifies bandwidth limitation at egress.
broadcast_allowed Specifies whether broadcast packets are
forwarded.
description Optional text.
first_ethertype,
second_ethertype
The ethertype used on the outgoing frame. It can
be transparent, thus using the value from the
received VLAN tag, or it can be set to a predefined
value.
flow_selector Assigns specific p-bit or DSCP values to specific
flows.
p_tag, second_p_tag Specifies the priority bits in the VLAN Tags to be
set for outgoing packets. The options ‘transparent’
and ‘untagged’ are also available.
tag, second_tag Specifies the VLAN IDs to be set for outgoing
packets. The options ‘transparent’ and ‘untagged’
are also available.
The resource objects and commands involved in configuring connections are
summarized in Figure 28 on page 59.
To Next Page
Loading...