Glossary
11 Maintenance
The only maintenance required by the EFN324 is the replacement of the fans
when needed. This is described in section 11.1 on page 81.
If it is necessary to replace an EFN324, follow the procedure in section 11.2 on
page 82.
11.1 Replacing the Fans
The fans are located in a tray on the right side of the EFN324, and can be
replaced while the EFN324 is running (provided that the replacement is done
quickly). To replace the fans:
1. Use a flat screwdriver to flip the fan tray cover out.
2. Pull the cover out.
3. Pull the fan tray out.
To Next Page
Loading...