LBI-39039B INTERFACES AND REQUIREMENTS
10
2.6. SOFTWARE REQUIREMENTS
The MD110 requires the use of BC 8.0 software or later. This software includes the country-specific program units that
are provided when ordered for the appropriate country. PC Softdisk software is required for external system backup and
software updates. An alternative to PC Softdisk is a second hard drive unit (HDU) which is used for software backup, but it
does not provide for software updates. There are two patches to the basic software that pertain to Jessica.
Item Quantity Description
BC 8.0A.CNI51 1 LIM system software.
PCSD 1 PC Softdisk software for the external PC. This includes FIOL for MD110
configuration.
Patch 34180 1 EZDISA - eliminates Authorization Code requirement for inbound interconnect
calls.
Patch 34745 1 Necessary if T1 Bothway Ground Start trunks are used for inbound interconnect
calls.
In addition, the MD110 must be programmed or configured with a customer-specific database. A configuration file
needs to be constructed for properly configuring the MD110 for the specific customer application. The remaining sections of
this manual provide additional information on MD110 configuration.
To Next Page
Loading...
