CONFIGURATION LBI-39039B
13
3.4. MD110 CONFIGURATION DEFINITION
The MD110 configuration must be defined for each customer’s specific requirements. Advance planning and
coordination with Ericsson Business Network (EBN) is required before an MD110 installation. The MD110 installation is
performed by EBN or other in-country Ericsson sales office. Ericsson Inc. is responsible for working with the customer to
provide MD110 configuration definition. This is performed by completing the MD110 configuration questionnaire contained
in Appendix A two weeks before the MD110 installation. Several areas that must be defined are listed below.
• Specification of trunk line connections
• Definition of trunk characteristics
• Definition of MD110 numbering plan
• Specification of least-cost routing requirements
• Identification of toll call restrictions
To Next Page
Loading...
