Ericsson MD110 - Common Abbreviated Dialing Numbers; Extensions and EDACS to Public Network; Extensions and Public Network to EDACS

LBI-39039B ADMINISTRATION AND EXAMPLE PROGRAMMING
38
5.7. COMMON ABBREVIATED DIALING NUMBERS
Common Abbreviated Dialing (CAD) numbers are common speed dial numbers. An extension's or route's CAD class
determines which CAD numbers it may use. The CAD classes are assigned as follows:
CAD CLASS
Extensions 0
EDACS Routes 1
Private Network Routes 2
Public Network Routes 3
5.7.1. Extensions and EDACS to Public Network
ADCOI
ABB
Abbreviated number
4XXX XXX must be entered in the script file and will be between 100
and 999
TRA
Translated number
9XXXX XXXX must be entered in the script file and will be between 1
and 19 digits
CLASS 0&1 Allowed for Extensions and EDACS to Public Network
5.7.2. Extensions and Public Network to EDACS
These CAD numbers may be used to provide DID to up to 900 radios in the example script file. Any CAD numbers used
for extensions and EDACS to the Public Network reduce the number available for DID to EDACS. The Public Network must
DID the number defined by ABB (Abbreviated number). The number defined by TRA is the radio number. Another method
to provide DID to all radios without using CAD is described in section 10.
See Table 1 for the EDACS number plan.
ADCOI
ABB
Abbreviated number
4XXX XXX must be entered in the script file and will be between 100 and
999
TRA
Translated number
XXXXX XXXXX must be entered in the script file and will be between 5
and 6 digits
CLASS 0&3 Allowed for Extensions and Public Network to EDACS