Ericsson MD110 - External Destination Codes; Inbound Call Routing

LIM CONFIGURATIONS FOR PUBLIC NETWORK CONNECTIONS LBI-39039B
51
6.3.4. External Destination Codes
If there are multiple routes for outbound calls, an External Destination Code containing T1 and Analog CO trunk routes
should place the T1 route before the Analog route. CHO=1 as a parameter for RODDI will make the route the first alternate
choice (5 alternates allowed). Leaving this parameter out will make the route the primary choice.
RODDI
DEST 690
ROU 3X This information will match the entry under
ROCAI.
ADC
Trunk seizure 0 Immediate
Called Number type 0 Unknown
Number series 0 Variable length
Calling Number type public 0 Unknown
Calling Number type private 5 Unknown
Network 0 Not fiber optic or TNS
Release 0 First party release
Backward signaling 0 Send from first digit
Terminating and transit seizure 0 Send terminating seizure signal
Off-hook Queuing threshold 0 No threshold
Expensive route warning tone 0 No ERWT
LCR accessibility 0 Accessible by all callers
Traveling Class Mark 0 Not sent
Return block 25 Limit on transit exchanges
PNR Number Translation Use 0 No Translation
SRT 4 Start digit for outgoing calls
6.3.5. Inbound Call Routing
This directs calls to DISA.
RODNI
ROU 3X This information will match the entry under ROCAI.
DAY 5000 Route incoming calls to DISA during day
NIG 5000 Route incoming calls to DISA during night